Support - Additional stud size, thicknesses, and units

Print Page | Close Window

Additional stud size, thicknesses, and units

Printed From: FrameBuilder-MRD
Category: FrameBuilder MRD
Forum Name: Support
Forum Description: Bugs
URL: http://www.framebuilder-mrd.com/forum/forum_posts.asp?TID=179
Printed Date: 25 Apr 2024 at 4:03am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Additional stud size, thicknesses, and units

Posted By: halogc
Subject: Additional stud size, thicknesses, and units
Date Posted: 01 Sep 2020 at 1:00pm

Hello,

I am new to your plugin. I noticed on the stud selection, the list is limited to only a few stud sizes. Here in the US a 3-5/8 metal stud is common. I know that stud gauge is typically 20GA (33 MIL) for light gauge applicaiton, but there is an engineered version (equal) that comes in 18MIL. How hard is it to add these types of additional options? Is it possible to do on our end? Also, Is there an option to input on center spacing in inches?

Thanks,

Angel

Replies:

Posted By: administrator
Date Posted: 04 Sep 2020 at 5:55am

Hi,

Yes you can add any LGS, HSS, HRS sections.

Please follow these instructions and other quick tips.

http://www.framebuilder-mrd.com/forum/how-to-enable-or-add-profiles_topic142.html - http://www.framebuilder-mrd.com/forum/how-to-enable-or-add-profiles_topic142.html

If you a roll former and need help setting help. Please email your contact details to support@framebuilder-mrd.com